The stainless steel mounting clips for Disano fluorescent bodies are designed to be non-corrosive in harsh environments. These clips are used to prevent the need for the body of the fitting to be drilled, thus maintaining it's IP rating.
Miscellaneous Spares
Stainless Steel Mounting Clips For Disano Lights.
Stainless steel mounting clip
for New Style
Disano Fluorescent body
part No. n/a
Small Stainless steel mounting clip
for Old Style
Disano Fluorescent body
part No. n/a
Large Stainless steel mounting clip
for Old Style
Disano Fluorescent body
part No. n/a
Surface Mount Transformers For Low Frequency Lighting
High quality Chassis mounting transformer suitable for 230VAC 50/60Hz operations and two independent secondary windings suitable for connecting in series, parallel or centre tap, giving a wide range of output voltage and current combinations.
6VA Output
Part No. N/A
High quality Chassis mounting transformer suitable for 220VAC 50/60Hz operations and two independent secondary windings suitable for connecting in series, parallel or centre tap, giving a wide range of output voltage and current combinations.
6VA Output
Part No. N/A
Wirewound power resistor For Low Frequency Lighting
Industry standard axial lead wire-wound power resistor.
Housed in a flameproof ceramic case with a glass fibre core, very effective at withstanding high overload currents.
7W rating with a resistance tolerance of 5%.
Supplied loose
Part No. RESIST08
Dimmer Kit For Low Frequency Lighting
| Dimmer Board and Wiring Loom |
Part No. EPA92 |
| Triac | Part No. TRIAC01 |
| Potentiometer | Part No. POT07 |
| Knob | Part No. KNOB01 |
| Dial | Part No. DIAL10 |
| Support Mounts | Part No. SPACER12 |
EPA Digital Dusk Dawn Dimmer Unit
| Ambient Temperature: | 0° to 50°C |
| Storage Temperature: | -10° to 70°C |
| Power Supply: | 12v – 24v AC/DC +/- 10% |
| Power Consumption: | 3VA Max |
| Contact Rating OP1: | 8A @ 240v AC resistive |
| Electrical Life: | 200,000 operations at rate load. |
| Part Number | C0NT01 |